The Stargazer

I have 5 available slots for pre-order

(waiting on knobs)

The Stargazer was designed as an evolution of my very popular Stargazer reverb pedal.
The base reverb was modeled after the original Stargazer as best I could with the new
platform. I tried to capture the essence of the original which used a Belton brick, but
with a more diffused, ambient sound and better control at higher decay levels. Of
course, adding an octave effect (SPARKLE) and a modulation control add to its
usability. It has modern features like soft touch switches, trails, and stereo functionality.

RIGHT FOOTSWITCH
Cycles between the top channel (BLUE) and bottom channel (RED)

LEFT FOOTSWITCH
Activates/deactivates the entire pedal.

MONO TO STEREO
Plugging a single cable into one of the inputs allows you to go from mono to stereo.
Your input will be duplicated and sent to both outputs.

LEDS
RIGHT TOP LED (BLUE): Is on when top row of controls is active
RIGHT BOTTOM LED (RED): Is on when top row of controls is active
LEFT LED (YELLOW): ON/OFFRIGHT FOOTSWITCH
Cycles between the top channel (BLUE) and bottom channel (RED)

MIX
Controls the blend between wet and dry. Can be 100%. Wet and Dry are at equal
weight at 12 o’clock.

DECAY
Controls the amount of decay and length of the reverb. Can go to near self-oscillation
when maxed

SPARKLE
This is an octave up effect applied only to the reverb signal. It is not to be confused with
shimmer. Shimmer is placed in the feedback loop and therefore it arpeggiates. This is
added post feedback, so it simply adds an octave and provides a much simpler, less
obnoxious sound.

MOD
Swirly Pitch Bending on the reverb signal. Provides subtle movement to the reverb to
avoid being stale. Can get pretty wobbly at high levels.